Onestops is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

The Difference Between Class 2 and Class 3 Safety Vests

Writen by Joshua Clark

Fact checked by Daniel Rocha

difference between class-2 and class 3 safety vest

Employees in the workplace must wear safety vests or elevated vests. These vests are high reflectors, which ensure that individual employees are visible, especially at night. The American National Standards Institute (ANSI) rates and certifies all safety vests. The number of reflective materials and high contrast fabric used to make up a safety vest determines its classification. The ANSI standard specifies the level of reflection in the tape as well as the intensity of the backdrop fabric colors. The more dangerous the environment, the more visible your team must be.

Read about the difference between class 2 and class 3 safety vests.

  • Workers in high-traffic areas and low-visibility locations will need to wear class 2 safety vests.
  • Class 3 vests are only worn by persons who operate in high-traffic areas, such as site inspections, emergency responders, railway employees, and utility crews. Approaching headlights should make it clear that this is a human. This includes reflective materials on the arms and legs, which significantly surpass the requirements for Class 2 safety vests.

For the most specific answer, please read the whole article!

What Is a Safety Vest?


A Safety Vest is an important piece of protective clothing that is developed and regulated to increase worker visibility. While we prefer to focus on traffic and road protection, better visibility may assist employees in a variety of sectors. Operators of facilities and warehouses where heavy machinery is used find that wearing their personnel in high visibility vests helps to decrease occurrences that result in unintentional injuries. Food processing, farming, and feeding, and order fulfillment are all included. For many professions, there are many types of safety vests.

Material of Safety Vest

Workwear uniforms are frequently sewn using thick and durable materials.

– Cotton fabric, khaki fabric, and Kate fabric are three types of textiles widely used to produce protective apparel for workers. Cotton is the most often used clothing fabric nowadays to create work uniforms that have superior perspiration absorption, durability, and comfort.

– The khaki fabric is stronger and thicker than other textiles. Hence, it is frequently used in protective uniforms due to its wrinkle resistance, perspiration absorption, and color preservation. Kate material is a cotton-polyester blend with high moisture absorption, easy cleaning, and a smooth surface.


There are safety vest types based on safety vest classes:

  • Class 1 Safety Vests

Class 1 vests are intended for use in low-impact environments. According to OSHA, this covers places where transport infrastructure does not exceed 25 mph. Employees should also be positioned a respectable distance from traffic to avoid injuries. Parking attendants, delivery people, and technical service employees frequently wear a Class 1 safety vest in light traffic zones.

  • Class 2 Safety Vests

Workers in high-density areas and low-visibility locations will need to wear class 2 safety vests. Weather conditions may decrease vision in some regions, and traffic speeds may reach 25 mph. Employees should still be stationed a safe distance from oncoming vehicles. Airport personnel, high-volume park or toll booth workers, and forest laborers frequently wear a Class 2 vest.

The retractable tape must cover at least 201 square inches on the hi-vis class 2. The bright tape lengths might be 8.373 linear feet of 2-inch tape or 12.2 linear feet of 1 3/8-inch tape. Fluorescent stripes should be placed over the shoulder and across the middle of the body in one or two horizontal stripes. With a class 2 reflective vest, you can work without worries.

  • Class 3 Safety Vests

Class 3 Safety Vests are according to ANSI Class 3. They are only worn by persons who operate in high-density areas, such as site inspections, rescue personnel, railway employees, and utility crews. Traffic speeds in certain locations may approach or surpass 50 mph. Workers are often required to work near a road or in other possible hazards. Therefore, they must be as visible as possible to avoid damage.

These vests must include at least 310 square inches of reflective material that is 12.92 linear feet long and 2 inches in width. Class 3 vest requirements are for the employee to have a complete silhouette outline. Incoming headlights should make it clear that this is a human. This includes reflectors on the arms and legs, which significantly surpass the requirements for class 2 vs class 3 safety vests.

Useful video:

Obtaining High-Quality Safety Vests for Your Employees

Reflective safety vests should be as protective as they are pleasant. Choose maximum overdrive, such as Class 1, 2, and 3 vests, if you’re looking for luminous safety vests for team members.

The PIP ANSI Type R Class 3 Two-Tone Surveyor Vest is constructed of mesh and solid polyester material, which increases ventilation and makes it less susceptible to dust and harm. The contrasting orange tape surrounding the silver reflector ensures maximum visibility.

The PIP ANSI R3 Two-Tone Mesh Surveyor Vest is built with mesh, which offers a lot of ventilation, especially in hot weather.

The PIP ANSI Class 2 Two-Tone Six Pocket Surveyor’s Vest features a back-mesh panel to make you feel comfortable on the job, as well as compartments for radios, telephones, and other equipment on the front panel. It also has reinforced stitching for further durability, as well as two-tone reflective material for increased visibility in the field.

For increased breathability, the PIP Type R Class 2 Two Pocket Zipper Mesh Vest 302-0702Z is composed of polyester mesh. You and your team can keep you nice on the job without jeopardizing your safety. It’s ideal for anyone who needs a class 2 high-vis.

Q&A About Safety Vest


What is the purpose of using a safety vest?

The goal is to restrict the influence of the outside world, as well as to reduce the impacts of hazardous substances that are hazardous to employees, those who work, and the health of those who come into daily touch with this environment.

As a result, protective apparel is a necessary aspect of ensuring the interests of users and demonstrating the company’s care, attention, and exemplary treatment of its business to its workforce.

Why should we concentrate on protective garment materials?

Most of today’s protective apparel is manufactured from thicker, more breathable materials than the typical. This helps protect the user’s safety by preventing hazardous substances, dirt, and dangerous items from entering the body.

If you don’t know how to pick the correct protective clothing for the task, you’ll face a slew of problems, such as being too hot in hot weather, too chilly in cold weather, and so on.

As a result, based on the business and sector of work, you need to understand how to pick the proper fabric to produce garments to make the working process run more smoothly.


With high visibility clothing class 1 2 3, have you made your decision yet?

Several industries in today’s world are constantly dangerous. As a result, protective clothes for employees are regarded as incredibly crucial items for each worker. The qualities of each style of uniform vary according to profession and field. Hope you like this article on the difference between class 2 and class 3 safety vests. Learn to achieve the finest achievements at work! Thank you for your time.

5/5 - (4 votes)